FD10 Film Developer
A fine grain black & white film developer concentrate.
Produces high edge sharpness.
One shot developer.
Storing of stock solution eliminated.
Dilute to: 1+9
PD5 Print Developer
A phenidone/hydroquinone developer concentrate designed for black and white paper. Resin coated and fibre based.
Suitable for processing sheet film.
Dilute to: 1+9
WT10 Warm Tone Print Developer
Fotospeed WT10 is a very versatile print developer which gives a warmer tone to prints. Dilution is variable to taste, with weaker dilutions increasing the warmtone effect. Contrast and vibrancy of your prints is maintained.
1L Concentrate, dilutes 1:9 - 1:29.
FX20 Rapid Fixer
Fotospeed FX20 Rapid Fixer is a general purpose liquid fixer concentrate that has no hardener added and is suitable for use with a wide range of B&W photographic materials. FX20 is very long lasting and will not, as with other brands of fixer, bleach back the print s highlights where extended fixing times are desirable.
SB50 Odourless Stop, With Indicator
Fotospeed SB50 is an odourless stop bath with indicator dye to warn of exhaustion. Makes for a more pleasant darkroom environment due to its odourless formula. SB50 dilutes 1+19 with water.
Fotospeed RCVC resin Coated Paper
Fotospeed RCVC is a high quality resin coated paper with a generously weighted base. Offered in two surfaces: Gloss or Oyster, the latter offering a degree of sheen and reflectance, similar to Ilford Pearl or Kentmere Fine Lustre. This paper differs from the competition in it's reaction to selenium toning - normally this is reserved for FB papers, however the Fotospeed exhibits excellent D-Max intensification.
RT20 Copper Toner
Copper/Red Toner is a liquid toner which is supplied in a two part concentrate which makes a single working solution. It is specifically designed for the toning of Fibre and Resin Coated B&W papers.
ST20 Sepia Toner
A variable Sepia Toner which can produce a wide range of sepia tones on Fibre and Resin Coated B&W papers. Complete Kit contains : Part 1 - Bleach ; Part 2 - Toner ; Part 3 - Toner Additive.
Parts 1 & 2 mix separately to make two working solutions with Part 3 is added in its concentrated form to part 1+2mixed working solution to adjust the shade of sepia required. Part 3 is needed to activate the toner.
WA50 Wash Aid
Fotospeed WA50 is specifically designed to speed the removal of fixing agents from the fibres of BW fibre based printing papers. Used in conjunction with a running water wash WA50 will cut washing time to around 20 minutes.
Dilutes 1+9 to make the volume required.
SB50 Odourless Stop, With Indicator
Fotospeed SB50 is an odourless stop bath with indicator dye to warn of exhaustion. Makes for a more pleasant darkroom environment due to its odourless formula. SB50 dilutes 1+19 with water.